YJZ80 I beam Hydraulic Straightening machine

Detailed Product Description
I-beam steel hydraulic straightening machine is applicable to straighten H and I
type steel or H and I beam steel wing plate when is on process of the welding and
heating bring on the bend. This machine is used easily with high speed. The straightening
quality is good.The machine is made of the base, right and left wall
plate, support structure, hydraulic pressure lifting straightening transmission
system, right and left above pressing wheel adjustment structure and main machine
roller. Main transmission structure is made of hydraulic pressure power, hydraulic
pressure pump, traversing hydraulic pressure motor, column gear motor, column
gear reducer, universal transmission axes, transmission to positive wheel;
when it s working ,main transmission roller is lifting through the bottom hydraulic
oil-crick with the above pressure wheel straightening the distortion wing plate.
The support structure is distortion with two sets. One side is operated with
thread pole handle. And the other side is tightened by hydraulic pressure (not
too tightening when using),making the belly plate in symmetrical position of the
main transmission wheel.
Front and back hydraulic pressure roller adopts the hydraulic oil-crock action. Turning
axes support lifts, after the main transmission wheel lifting, assuring the
move smoothly during the straightening. Meanwhile in the input side-floating
roller, it install two sets guide tighten wheel that used for support the work-piece
when suspending in the roller, in case to strike the main machine when the
work-piece is in and out the main machine.