XG-600V NC through cutting machine

It is mainly applied to thermal cutting in through wire and of various duct system.
Applicable work-piece material covers: carbon steel tube, stainless steel tube
and nickel-copper tube. On basis of human design, the equipment is of stable performance
and easy to operate, the advanced and reliable structure of capability
of long-term continuous processing. Spindle gearing is located on right of the
equipment.  
  
Product main features
  
 
a. Main cutting mode covers O-branch I-branch 
b.1. Cutting perpendicular rectangular bore made in main pipe; 
2. Perpendicular rectangular bore made in main pipe; 
3. Perperdicular slot made in main pipe; 
4. Main pipe perpendicularly intersects branch pipe through, main pipe bevels branch
pipe through,main pipe is off center of branch pipe through; 
5. Circular duct abutting joint(lobster) 
6. Circular duct perpendicularly intersects plane, circular duct bevels pane; 
7. Two fold branch pipe passes though; 
8. Lobster miter cutting  
 
Main technical parameter 
  
 

Cutting pipe diameter: 60-600mm
Workpiece ovality: less than2%
Work-piece length: less than6500mm
Cutting speed: 100-750mm/min
Traveling speed: 100-5000mm/min
Oscillation angle of cutting torch: less than 45%
Number of control shaft:4
1.Work-piece rotation axis: (stepless speed regulation)
2.X axis axial shifting shaft of barrow along work-piece
3.Plane oscillating shaft of cutting torch in X-Z axis.
4.Vertical shifting shaft of cutting torch barrow
Spindle bore that steel tube can go through:less than260mm
Maximum course: X direction :6000mm Z direction:350mm.